海報
編號 |
論文
編號 |
論文題目 |
| D-01 |
0013 |
多層氮化鋁鉻/氮化鈦釩硬質薄膜之機械性質與高溫氧化研究 |
| D-02 |
0015 |
利用磁控濺鍍鋁膜及陽極氧化技術改善AZ91D鎂合金之抗腐蝕性質 |
| D-03 |
0016 |
自潤性氮化釩鈦硬質薄膜之製程設計與磨潤機制研究 |
| D-04 |
0018 |
Optimization of the Deposition Processing of VN Thin Films by Design of Experiment Method |
| D-05 |
0033 |
基材偏壓對濺鍍鋯摻雜二硼化鈦薄膜之結構與機械性質的影響 |
| D-06 |
0039 |
Optimization of the Deposition Processing of VN Thin Films by Single Variable (Nitrogen Flow Rate) Method |
| D-07 |
0040 |
Measurement of Residual Stress of TiZrN Thin Films by Combining Average X-Ray Strain (AXS) and Nanoindentation Methods |
| D-08 |
0043 |
Residual Stress Gradient Measurement on Hard Coatings by Combining Average X-ray Strain (AXS) and Layer By Layer Methods |
| D-09 |
0053 |
Effect of Zr Interlayer on Residual Stress of ZrN Thin Films |
| D-10 |
0054 |
高功率脈衝磁控濺鍍Ta-Si-N鍍膜機械性質之研究 |
| D-11 |
0071 |
The mechanical and tribological properties of nanocomposite CrMoSixN coatings |
| D-12 |
0072 |
以共濺鍍型高功率脈衝磁控濺鍍系統製備CrTiBN奈米複合薄膜研究 |
| D-13 |
0073 |
以共濺鍍型高功率脈衝磁控濺鍍系統製備CrTiSiN薄膜之研究 |
| D-14 |
0078 |
AZ31鎂合金微弧氧化添加奈米微粒之技術開發 |
| D-15 |
0085 |
利用90o彎道磁場過濾式陰極電弧沉積抗蝕之超硬質Cr3C2鍍層 |
| D-16 |
0091 |
Effect of TixAly alloy target composites on the microstructural and mechanical properties of TiAlN thin films deposited by high power impulse magnetron sputtering |
| D-17 |
0093 |
Effect of nitrogen-argon flow ratio on the microstructural and mechanical properties of AlSiN thin films prepared by high power impulse magnetron sputtering |
| D-18 |
0107 |
氮化鉬濺鍍薄膜之製程參數與微結構影響 |
| D-19 |
0110 |
奈米多層TiVN/TiSiN硬質薄膜之機械性質與切削加工性能分析 |
| D-20 |
0113 |
以複合式HIPIMS及RF鍍膜系統製備CrSiN薄膜及其性能研究 |
| D-21 |
0120 |
TaSiN鍍層的抗氧化行為 |
| D-22 |
0125 |
介層設計多層氮化鋁鈦硼硬質鍍膜之高溫氧化及機械性質分析 |
| D-23 |
0128 |
溶膠–凝膠法被覆氧化鈦矽複合膜於鈦合金基材之機械性質與抗腐蝕性 |
| D-24 |
0145 |
The Development of Ultrathin Zr-Cu-Ni-Al-N Thin Film Metallic Glass as a Diffusion Barrier in Cu-Si Interconnect |
| D-25 |
0153 |
共濺鍍鈦鋯鉿合金氮化物摻雜鋁薄膜之微結構與特性研究 |
| |
|
|